Let the professionals at The Stain Eaters show you...

How to tidy up those unsightly grease spills and restore your properties clean image...AND...

• Meet all OH&S, Environmental and local regulations.
• Avoid the costly mistakes that ‘general purpose’ cleaners create who can soak the stain further in.
• Seal your surface to make future cleaning easy.

Dear Building Owner/Property Manager:

You’re reading this because you’re SERIOUS about cleaning up you grease spill quickly at your commercial property. You understand the concept of ‘getting it right the first time’ and fully appreciate the benefits of a fast response service to minimise any accidents and avoid environmental prosecution.

At The Stain Eaters, we provide many of Australia’s top commercial property owners with grease spill extraction services from hard masonry surfaces.

We’ve cleaned many of Australia's largest shopping centres to rid them of hazardous grease spills.

300 Lt Grease Trap Overflow Spill	Stain Eaters Treatment	Final Result - Surface Restored

Video: The Stain Eaters Industrial Grease Spill Restoration Process

We are the FIRST and oldest stain removal experts in Australia. For 35 years, we’ve been using the most advanced stain and graffiti removal technology available. All Stain Eaters Technicians undergo a rigorous one year training program. The results? We’ll get stains out of hard surfaces quickly and your building will look like new.

We can clean and restore:

Grease Removal from Masonry Surfaces

Grease spills are dangerous slip hazards and pose serious health and environmetal risks. They can be difficult to remove because depending on the consistency of the gease it can soak into the surface as well as create a thick layer on top that spreads when cleaning commences.

Unfortunately it only takes one incorrect process to permanently stain many surfaces. It is important that grease is removed from the surface as soon as possible to prevent deep penetration. If you are unfortunate enough to sustain a spill, cover the area with sand, saw dust or kitty litter to soak up as much grease as possible. Our team can clean this up and dispose of responsibly on arrival.

The Process

A three step chemical solution is used to breakdown and remove the grease.

Step 1 - Trace in and dissolve the molecular structure of the grease.

Step 2 - Suspend the grease in situ preventing further absorption.

Step 3 - Draw the grease in suspended chemical solution to the surface.

The grease is then removed from the surface using heated water under pressure and the entire area neutralised and deep cleaned.

It is important to note that the surface must be dry for the process to work effectively and depending on the age of the grease spill and the level of absorption, a slight stain mark can remain that does fade over a few weeks of UV light from the sun.

Grease is generally easier to remove than oil because it tends to sit on the top of surfaces due to its consistency. A similar process to that of oil is used.

Complete Service Offered

Extensive research by our Engineering Department has developed a range of processes and equipment to clean up your worst grease spills, quickly and environmentally safely. Regardless of your problem, our team can organise the road closure, contain the grease spill spread, chemically neutralise to restore the substrate, vacuum collect and safely discharge the waste without harm to the environment.

Grease Trap Spill	Restored Bituman Afterwards

Our Comprehensive Grease Extraction Service Also Includes:

• Individual stain Identification and expert consultation.
• All local permits for road and footpath closures.
• Licensed experienced Technicians.
• Organising EPA certificates
• Advice of surface sealing options to make future cleaning easy
• Documentation and management of OH&S risks.

Oil and Grease Removal off Steel and Manufacturing Equipment

One of our manufacturing clients had some finished steel delivered from China. It had been covered in oil to protect it from corrosion during shipping. By the time it landed in Australia, it had become contaminated by dirt and was sticky, making the product unsaleable.

The steel strips were 6m long and as there were 1950 of them, it was nearly 12 km of cleaning required. After conducting tests on the best method of removal, we then designed an efficient cleaning process that fitted within our client's tight budget.

The cleaning system had to transport, store, stack, move, clean and dry the steel sections in an economical manner taking into consideration minimising our handling time, water usage, waste water generated and safe waste water disposal.

The results of the cleaning speak for themselves. The Stain Eaters are perfectly set up to cater for this kind of work. With the correct chemical application, correct method of cleaning, all the right procedures in place to protect the environment, right equipment and training, these jobs run smoothly on time and budget.

Our Service Restoration Vehicles (SRV) have all the right equipment on board to conduct these kinds of jobs at a moment's notice and can be diverted when on the road at any time to help you with these cleaning issues.

Our team enjoys getting our teeth into these type of cleaning challenges!

Oil and Grease Removal in Food Preparation Areas

If you have food preparation areas that require a thorough de-sanitising then we have a safe process for you to utilise.

Using heated water under pressure we can give your floors, walls and equipment a complete clean and degrease that will see you getting the tick of approval from the health department.

Avoid this Common Mistake and Save Time, Hassle, and Money

Every week, we receive calls from building owners who have trusted the cleaning of their property exterior to the lowest quote they could find. The results have been disastrous and the property owner or manager calls us to repair the damage. The property owner ends up paying twice for the work - when a call to The Stain Eaters could have sorted all the exterior issues quickly and for a sensible rate.

The building cleaning industry is not fully regulated and there are unscrupulous characters doing very average work in an unsafe manner. These photos illustrate the type of shoddy work we often have to repair.

7 Reasons to Choose Stain Eaters for Grease Spill Removal

You’re also protected by our qualifications:

The Stain Eaters Rock-Solid Guarantee - We Get it Right the First Time

If you’re not TOTALLY and COMPLETELY satisfied with our work, we’ll come back, at our expense, to re-clean the property. No questions asked.